GARLOCK 29507-5270
OUTRAS MARCAS
GARLOCK
GARLOCK 29507-5270
29507-5270 PART NUMBER
KLOZURE® ISO-GARD® ISO-GARD® Bearing Isolator - Filled PTFE - Flanged Small Cross Section Design - 1.8888 in Shaft Diameter, 2.8740 in OD, 0.6250 in Wide, Labyrinth Lip
QTY QUOTEGARLOCK - GARLOCK 29507-5270
The KLOZURE® ISO-GARD Filled PTFE Bearing Isolator family provides excellent chemical resistance and exceptional bearing protection under the harshest conditions
Non-wearing components provide lifetime bearing protection
Engineered labyrinth design excludes contamination while retaining bearing lubrication
Non-contact design uses 97% - 99% less energy vs. contact lip seals
Operating Temperature: -22°F to 400°F (-30°C to 204°C)
Made in USA
Non-flooded (oil level below drain port), splash/bath, or drop/spray/mist applications only.
IP 65 Rating per NEMA MG 1-2003.
Meets IEEE 841-2001 and API 610 standards.
Assembled Design
SPECIFICATIONS
| Shaft Diameter | 1.8888 in |
|---|---|
| Typical Application | Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Chemical Industry, Food and Pharmaceutical Industry, Hydroelectric Industry, Power Generation Industry, Wind Turbine Industry, Oil and Gas Industry, Mining Industry, other Industrial Applications |
| Lip Material | Labyrinth |
| Harmonization Code | 3926904590.US |
| Construction Description | ISO-GARD® Small Cross-Section Design, Filled PTFE Rotor and Stator, FKM O-Rings, and 0.375" Flange |
| Manufacturer Catalog Number | 29507-5270 |
| Continuous Temperature Range | -22 to 400°F |
| Weight | 0.27 lb |
| Maximum Shaft Surface Speed | 4500 fpm |
| Outside Diameter | 2.874 in |
| Misalignment Tolerance | 0.02 in |
| Width | 0.625 in |
| Pressure Tolerance | Ambient |
