GARLOCK 29521-6545
OUTRAS MARCAS
GARLOCK
GARLOCK 29521-6545
29521-6545 PART NUMBER
KLOZURE® ISO-GARD® ISO-GARD® Bearing Isolator - Filled PTFE - Vertical Design - 4.7241 in Shaft Diameter, 5.9060 in OD, 0.8750 in Wide, Labyrinth Lip
QTY QUOTEGARLOCK - GARLOCK 29521-6545
The KLOZURE® ISO-GARD Filled PTFE Bearing Isolator family provides excellent chemical resistance and exceptional bearing protection under the harshest conditions
Non-wearing components provide lifetime bearing protection
Engineered labyrinth design excludes contamination while retaining bearing lubrication
Non-contact design uses 97% - 99% less energy vs. contact lip seals
Operating Temperature -22°F to 400°F (-30°C to 204°C)
Made in USA
Non-flooded (oil level below drain port), splash/bath, or drop/spray/mist applications only.
IP 65 Rating per NEMA MG 1-2003.
Assembled Design
Meets IEEE 841-2001 and API 610 standards.
SPECIFICATIONS
| Shaft Diameter | 4.7241 in |
|---|---|
| Typical Application | Exceptional Bearing Protection, Rotating Applications, Pumps, Gearboxes, Motors, Energy Efficient Applications, Primary Metals Industry, Steel Industry, Aluminum Industry, Pulp and Paper Industry, Chemical Industry, Food and Pharmaceutical Industry, Hydroelectric Industry, Power Generation Industry, Wind Turbine Industry, Oil and Gas Industry, Mining Industry, other Industrial Applications |
| Lip Material | Labyrinth |
| Harmonization Code | 3926904590.US |
| Construction Description | ISO-GARD® Vertical Design, Filled PTFE Rotor and Stator and FKM O-Rings, 0.385" Flange, 2 O-Rings on OD |
| Manufacturer Catalog Number | 29521-6545 |
| Continuous Temperature Range | -22 to 400°F |
| Weight | 0.34 lb |
| Maximum Shaft Surface Speed | 4500 fpm |
| Outside Diameter | 5.906 in |
| Misalignment Tolerance | 0.02 in |
| Width | 0.875 in |
| Pressure Tolerance | Ambient |
