INDUSTRIAL MAGNETICS INC TPLP30DS
INDUSTRIAL MAGNETICS INC
INDUSTRIAL MAGNETICS INC TPLP30DS
TPLP30DS PART NUMBER
Transporter® Low Profile Lifting Magnet - 3/8 in NPT Mount , 53 lb Max Pull, 3.00 in Dia
QTY QUOTEINDUSTRIAL MAGNETICS INC - INDUSTRIAL MAGNETICS INC TPLP30DS
Automated press to press transfer systems
Robotic “Pick & Place”
Manual and automated machine loading/unloading
Outlasts vacuum cups in most applications
Grasps odd shaped or perforated parts
Increases production and reduces shop air costs
Operates effectively in any orientation
Will not drop parts if system air-loss occurs
Reduces noise
Maximum operating temperature 140°F (60°C)
Destacks* without double-blanking when the appropriate magnet is selected for the application
Double Acting Option Available
Powerful Rare Earth magnet positively holds parts - no dropping or shifting in the event of air loss
Lightweight, low-profile design for minimal die clearance
Instantaneous pick-up and release
Uses up to 95% less air than vacuum cups
Easy installation on existing tooling booms or robotic face plate.
Threads onto a variety of typical 3/8 NPT vacuum cup tooling, including quick disconnect adapters
3/8 BSPP Fitting - British Standard Pipe Parallel (G) Thread (Option BS): Available on TPLP15 & TPLP30 only.
Extra Strength (Option ES): Available on TPLP30 only.
NOTE: Lifting capacity listed is NOT derated. Proper system design must include no less than 3/1 safety factor. (Typical systems 3/1 to 6/1).
SPECIFICATIONS
| Mount Type | 3/8 in NPT |
|---|---|
| Height | 2.48 in |
| Maximum Pull Force | 53 lb |
| Maximum Temperature | 140?F (60?C) |
| Material | Rare Earth |
| Additional Details | The Transporter® LP is designed to directly replace vacuum cups with minor tooling and valve adjustments. Powerful Rare Earth magnets positively hold the parts during transfer, greatly reducing the chance of slipping and shifting of your part due to oily coatings. An optional ?low-skid? boot is also available to increase grip on parts during transfer. A short burst of shop air pressure is applied in order to release parts. To pick-up or grip parts, the air pressure must be exhausted to the atmosphere. |
| Diameter | 3 in |
