POWER TEAM (SPX) PQ604
POWER TEAM (SPX)
POWER TEAM (SPX) PQ604
PQ604 PART NUMBER
PQ60 Heavy Duty Electric Pump - Double-Acting, 2 hp, 5.70 gal Reservoir, 1250.0 in³ Usable Capacity, 60 in³/min Flow at Max psi, 230 V, 60 Hz
QTY QUOTEPOWER TEAM (SPX) - POWER TEAM (SPX) PQ604
Pump designed specifically for heavy duty, extended cycle operations—up to 200 tons
For operating single- or double-acting cylinders
Metal shroud keeps dirt and moisture out of motor and electrical components
Electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption
Internal relief valve limits pressure to 10,000 psi, external relief valve is adjustable from 1,000 to 10,000 psi
Pumps operate below maximum OSHA noise limitation
Start and operate under full load, even with voltage reduced 10 %
SPECIFICATIONS
| Pump Type | PQ60 Heavy Duty Electric Pump |
|---|---|
| Reservoir Capacity (Cubic Inches) | 1316.7 in³ |
| For Use With | Double-Acting Cylinders |
| Usable Oil Capacity | 1250 in³ |
| Power Rating | 2 hp |
| Typical Flow At Max Psi | 60 in³/min |
| Voltage | 230 V |
| Typical Flow At 10000 Psi | 60 in³/min |
| Frequency | 60 Hz |
| Typical Flow At 5000 Psi | 65 in³/min |
| Amperage | 11 A |
| Typical Flow At 1000 Psi | 70 in³/min |
| Motor Phase | 1 ph |
| Typical Flow At 100 Psi | 730 in³/min |
| Max Rpm | 1725 rpm |
| Maximum Pressure | 10000 psi |
| Valve Part Number | 9506 |
| Sound Level At Idle/10000 Psi | 74/76 dB(a) |
| Valve Type | 4-Way, 3-Position (Tandem Center) Valve w/Posi-Check® |
| Overall Length | 15.5 in |
| Valve Type/Function | 4-Way, 3-Position / Advance Hold Return |
| Overall Width | 14.25 in |
| Valve Function Details | ?Advance,? ?hold? and ?return.? The Posi-Check® feature guards against pressure loss when shifting from ?advance? to ?hold? position. |
| Overall Height | 25.125 in |
| Control Switch | Run/Off/Pulse |
| Weight | 162 lbs |
| Reservoir Capacity | 5.7 gal |
| Manufacturer Product Page | http://www.spxflow.com/en/power-team/pd-pq60-electric/ |
