POWER TEAM (SPX) PE554PT

POWER TEAM (SPX) PE554PT

POWER TEAM (SPX)

POWER TEAM (SPX) PE554PT

PE554PT PART NUMBER

Vanguard® PE55 Electric 2-Speed Pump - Single or Double-Acting, 1-1/8 hp, 2.50 gal Reservoir, 525.0 in³ Usable Capacity, 56 in³/min Flow at Max psi, 110/115 V, 50/60 Hz

POWER TEAM (SPX) - POWER TEAM (SPX) PE554PT

For use with single-acting or double-acting Power Seat, Stressing Jacks ONLY; up to 200 tons

1-1/8 hp, 12,000 rpm, 110/115 volt, 50/60 Hz universal motor; draws 25 amps at full load, starts at reduced voltage. CSA rated for intermittent duty

10 foot remote motor control (except PE552S which has a 25 foot remote motor and valve control)

True unloading valve achieves greater pump efficiency, allowing higher flows at maximum

Reservoirs available in sizes up to 10 gallons

Light weight and portable. Best weight to performance ratio of all Power Team pumps

Power Team’s "Assemble to Order" system allows you to choose from a wide range of pre-engineered, off-the-shelf components to build a customized pump to fit specific requirements. By selecting standard components you get a "customized" pump without "customized" prices. All pumps come fully assembled, less oil, and ready for work


SPECIFICATIONS

Pump Type PE55 Electric 2-Speed Pump
Reservoir Capacity (Cubic Inches) 577.5 in³
For Use With Single or Double-Acting Cylinder Stressing Jacks w/ Power Seater
Usable Oil Capacity 525 in³
Power Rating 1-1/8 hp
Typical Flow At Max Psi 56 in³/min
Voltage 110/115 V
Typical Flow At 10000 Psi 56 in³/min
Frequency 50/60 Hz
Typical Flow At 5000 Psi 74 in³/min
Amperage 25 A
Typical Flow At 700 Psi 440 in³/min
Motor Phase 1 ph
Typical Flow At 0 Psi 704 in³/min
Max Rpm 12000 rpm
Maximum Pressure 10000 psi
Valve Part Number 9628
Sound Level At Idle/10000 Psi 90/89 dB(a)
Valve Type 4-Way, 3-Position (Tandem Center) Manual, Post-Tensioning Single-Strand Valve
Overall Length 14 in
Valve Type/Function 4-Way, 3-Position / Advance Hold Sequenced Return
Overall Width 9.5 in
Valve Function Details With valve in center position, pump is started. Next the cable is inserted into stressing tool, valve is placed in ?A? position; ?Pull? portion of stressing tool is pressurized to specified level for proper cable tensioning (?A? port is checked internally, can only be released by building pressure in ?B? position). Next the valve is placed in ?B? position, which is pressure controlled and will not exceed 6,400 psi (440 bar); ?Return? portion of stressing tool is pressurized and will release ?A? port when pressure reaches approximately one-half the ?A? port pressure??A? port remains open as long as this pressure differential is maintained. Then the pump is stopped, valve is placed in ?A? position, releasing ?B? port pressure.
Overall Height 18.25 in
Control Switch Remote Motor
Weight 65 lbs
Reservoir Capacity 2.5 gal
Manufacturer Product Page http://www.spxflow.com/en/power-team/pd-pe55-electric-portable/
COPYRIGHT © 2024 - SOME RIGHTS RESERVED TO RPM GROUP
RPM GROUP

QUICK QUOTATION

Welcome!

Here you can request your quote in a quick and easy way.

How many (different) items you want to quote??

1 Item From 2 until 5 items 6 or more items

*Quantity of each item will be asked later

Which partnumber you looking for?

How many?

Which brand?

In case your itens need some time to get to you what is an acceptable delivery time:

Imediatly Up to 10 days Up to 30 days More then 30 days

*The delivery time might chance the prices of the offer.

What is the name of your company? If you don't represent a company your name will do it.

Qual o CNPJ da sua empresa?

What is your country? If you want the goods to be offered to another country please inform

SELECIONAR

Type a state

Type a state

What is your name?

What is your phone number?

What is your e-mail?

Do you have any observations?

What is the destination of the product?

Consumer Reseller Industrialização

Your quote was successfully requested!

One of our specialists will take care of it and soon you will receive a contact.

For requests above 6 different items send us an e-mail with the details of your needs:

[email protected]

One of our specialists will take care of it and soon you will receive a contact.