BODINE ELECTRIC COMPANY 0794
BODINE ELECTRIC COMPANY
BODINE ELECTRIC COMPANY 0794
0794 PART NUMBER
DC Drive - 7/16 hp, 5/8 hp, 115 V ac Input, 1 ph, 130 V dc Output, Non-Regenerative, IP-10 Rated, 50/60 Hz, NEMA 1
QTY QUOTEBODINE ELECTRIC COMPANY - BODINE ELECTRIC COMPANY 0794
Input 115 VAC, 50/60 Hz, 1-phase. Output 0-130 VDC
Filtered DC output for cooler motor operation, longer brush life, lower audible noise, and wider speed range
Forward-Brake-Reverse (FBR) switch for dynamic braking
DIP switches to easily calibrate control for different motor sizes
Two diagnostic LEDs on control board
NEMA 1 enclosure for environmental protection
Trim pots on PC board to adjust torque limit, minimum speed limit, maximum speed limit, acceleration time, and speed regulation
Speed can be adjusted manually using speed pot mounted on enclosure
Terminal block inside enclosure for motor connection
Back EMF feedback maintains better than 2% speed regulation
Fuse holder for line on front panel
Toggle switch on enclosure indicates AC power on
Factory installed AC line cable
SPECIFICATIONS
| Horsepower | 7/16 , 5/8 hp |
|---|---|
| Continuous Current | 3.7 A |
| Drive Input Voltage | 115 V ac |
| Peak Current | 7.1 A |
| Drive Input Phase | 1 ph |
| Ambient Temperature Range | 32 to 104 °F |
| Drive Output Voltage | 130 V dc |
| Brake Type | Dynamic |
| Drive Type | Non-Regenerative |
| Braking | No |
| Enclosure Rating | IP-10 |
| Additional Details | Rated for continuous operation in 40°C ambient with no additional heat sink. Drives Bodine 90VDC, 130VDC and 90/130VDC rated PMDC gearmotors and motors. Drives 90V "SCR duty" and 130V "PWM duty" permanent magnet DC motors made by other manufacturers. |
| Function Of Controller | Run/Stop/Jog |
| Standards Met | UL, CSA |
| Feedback Type | none |
| Weight | 2 lbs |
| Frequency Rating | 50/60 Hz |
| Manufacturer Product Page | http://www.bodine-electric.com/Asp/ProductModel.asp?Context=20&Name=Filtered%20PWM%20DC%20Speed%20and%20Direction%20Control&Model=0794&Sort=11978 |
| Enclosure Type | NEMA 1 |
| Max Horsepower | 7/16 @ 90V / 5/8 @ 130V hp, hp |
