TIMKEN (FAFNIR) RAK1 3/8
TIMKEN (FAFNIR)
TIMKEN (FAFNIR) RAK1 3/8
RAK1 3/8 PART NUMBER
Pillow Block Ball Bearing Unit - Two-Bolt Base, 1.3750 in Bore, Cast Iron Material, Normal Duty, Non-Expansion Bearing (Fixed)
QTY QUOTETIMKEN (FAFNIR) - TIMKEN (FAFNIR) RAK1 3/8
Compact, one-piece housing can be mounted in any position
Pre-lubricated and ready for immediate installation
Gray iron pillow block
Epoxy coated housing with contact seals
SPECIFICATIONS
| Mounting | Two-Bolt Base |
|---|---|
| Finish/Coating | Uncoated |
| Bore Diameter | 1.375 in |
| Overall Width | 2-1/64 in |
| Bore Type | Round |
| Operating Temperature Range | Maximum of +250 °F |
| Base To Bore Centerline | 1.8125 in |
| Radial Dynamic Load Capacity | 6400 lb |
| Duty Type | Normal Duty |
| Radial Static Load Capacity | 3400 lb |
| Housing Material | Cast Iron |
| Base Width | 1-25/32 in |
| Locking Device | Eccentric Collar |
| Bolt Center-To-Center Length | 5-1/8 in |
| Seal Type | Contact/Lip |
| Maximum Rpm | 3930 RPM |
| Expansion Type | Non-Expansion Bearing (Fixed) |
| Lubrication Type | Lubrication Fitting |
| Overall Length | 6.5625 in |
| Series | RAK |
| Overall Height | 3.625 in |
| Replacement Bearing | G1106KRRB |
