TIMKEN (FAFNIR) RAK1 1/8
TIMKEN (FAFNIR)
TIMKEN (FAFNIR) RAK1 1/8
RAK1 1/8 PART NUMBER
Pillow Block Ball Bearing Unit - Two-Bolt Base, 1.1250 in Bore, Cast Iron Material, Normal Duty, Non-Expansion Bearing (Fixed)
QTY QUOTETIMKEN (FAFNIR) - TIMKEN (FAFNIR) RAK1 1/8
Compact, one-piece housing can be mounted in any position
Pre-lubricated and ready for immediate installation
Gray iron pillow block
Epoxy coated housing with contact seals
SPECIFICATIONS
| Mounting | Two-Bolt Base |
|---|---|
| Finish/Coating | Uncoated |
| Bore Diameter | 1.125 in |
| Overall Width | 1-29/32 in |
| Bore Type | Round |
| Operating Temperature Range | Maximum of +250 °F |
| Base To Bore Centerline | 1.5625 in |
| Radial Dynamic Load Capacity | 4900 lb |
| Duty Type | Normal Duty |
| Radial Static Load Capacity | 2500 lb |
| Housing Material | Cast Iron |
| Base Width | 1-9/16 in |
| Locking Device | Eccentric Collar |
| Bolt Center-To-Center Length | 4-5/8 in |
| Seal Type | Contact/Lip |
| Maximum Rpm | 4570 RPM |
| Expansion Type | Non-Expansion Bearing (Fixed) |
| Lubrication Type | Lubrication Fitting |
| Overall Length | 6.1875 in |
| Series | RAK |
| Overall Height | 3.1563 in |
| Replacement Bearing | G1102KRRB |
