CHAR-LYNN (EATON) 109-1102-006
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 109-1102-006
109-1102-006 PART NUMBER
Hydraulic Geroler Disc Valve Motor - 4000 - Standard, 162.2 cm³/r Max Geometric Displacement
QTY QUOTECHAR-LYNN (EATON) - CHAR-LYNN (EATON) 109-1102-006
Ten displacements, a variety of mounting flanges and output shafts
Reliable, proven design
High efficiency
Environmental protection options
Flexibility in designing this motor into a system
Options that fit well into tough applications
Applications: Mowing, snow removal, sprayer, trencher and wood products
SPECIFICATIONS
| Series | 4000 - Standard |
|---|---|
| Replacement Drive - Sold Separately | 006 Design - 21372-003 - 1 Required |
| Displacement | 9.90 in³/r |
| Replacement Drive Valve - Sold Separately | 006 Design - 8510-000 - 1 Required |
| Mounting Type | 4-Bolt |
| Replacement Geroler - Sold Separately | 006 Design - 8464-003 - 1 Required |
| Maximum Operating Temperature | 180 °F |
| Replacement Housing, Bearing Side (Front) - Sold Separately | 006 Design - 23170-002 - 1 Required |
| Output Shaft Size | 1-1/4 in Straight - Straight Key |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 006 Design - 16292-100 - 8 Required |
| Operation Mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Mounting Flange - Sold Separately | 006 Design - 23171-002 - 1 Required |
| Drain Connection Size | .4375-20 Unf-2b O-ring Port Size -4 With Check Valve |
| Replacement Output Shaft And Bearing Kit - Sold Separately | 006 Design - 23310-001 - 1 Required |
| Operation Rating Description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Plate Valve - Sold Separately | 006 Design - 8504-000 - 1 Required |
| Port Orientation | Staggered Ports |
| Replacement Rear Housing - Sold Separately | 006 Design - 23382-003 - 1 Required |
| Replacement Balance Ring - Sold Separately | 006 Design -21316-000 1 Required |
| Replacement Valve-Sold Separately | 006 Design - 8500-000 - 1 Required |
| Replacement Buna Seal Kit - Sold Separately | 006 Design - Rear Seal Kit 61234-000, 006 Design - Shaft Seal Kit 61281-000 - 1 Required Each |
| Replacement Viton Seal Kit - Sold Separately | 006 Design - 61248-000 - 1 Required |
