CHAR-LYNN (EATON) 119-1031-003
CHAR-LYNN (EATON)
CHAR-LYNN (EATON) 119-1031-003
119-1031-003 PART NUMBER
Hydraulic Geroler Disc Valve Motor - 10000 - Standard, 940.8 cm³/r Max Geometric Displacement
QTY QUOTE
SPECIFICATIONS
| Series | 10000 - Standard |
|---|---|
| Replacement Drive - Sold Separately | 004, 003 & 002 Design - 6167-000 - 1 Required |
| Displacement | 57.41 in³/r |
| Replacement Drive Valve - Sold Separately | 004, 003 & 002 Design 6168-000 - 1 Required |
| Mounting Type | 4-Bolt |
| Replacement Front Bearing Spacer - Sold Separately | 004, 003 & 002 Design - 6175-000 - 1 Required |
| Maximum Operating Temperature | 180 °F |
| Replacement Geroler - Sold Separately | 004, 003 & 002 Design - 8573-004 - 1 Required |
| Output Shaft Size | 2-1/4 in Straight - Straight Key |
| Replacement Housing, Bearing Side (Front) - Sold Separately | 004, 003 & 002 Design - 62006-000 - 1 Required |
| Operation Mode | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Long Cap Screw (Cap End) - Sold Seprately | 004, 003 & 002 Design -14410-003 - 4 Required |
| Drain Connection Size | .5625-18 Unf-2b O-ring Port Size -6 |
| Replacement Output Shaft - Sold Separately | 004, 003 & 002 Design - 8484-000 - 1 Required |
| Operation Rating Description | Continuous Rating - Motor May Be Run Continuously At These Ratings. / Intermittent Operation - 10 Percent Of Every / Peak Operation - 1 Percent Of Every Minute |
| Replacement Plate Valve - Sold Separately | 004, 003 & 002 Design 8957-000 - 1 Required |
| Port Orientation | Staggered Ports |
| Replacement Radial Bearing - Sold Separately | 004, 003 & 002 Design - 9003-002 - 2 Required |
| Replacement Balance Ring - Sold Separately | 004, 003 & 002 Design 21318-000 - 1 Required |
| Replacement Rear Housing - Sold Separately | 004, 003 & 002 Design - 62506-000 - 1 Required |
| Replacement Bearing Spacer - Sold Separately | 004, 003 & 002 Design - 6181-000 - 1 Required |
| Replacement Valve-Sold Separately | 004, 003 & 002 Design 6792-000 - 1 Required |
| Replacement Buna Seal Kit - Sold Separately | 004, 003 & 002 Design - Motor Seal Kit 6405-000, Shaft Seal Kit 6406-000 - 1 Required Each |
| Replacement Wear Place - Sold Separately | 004, 003 & 002 Design 8958-000 - 1 Required |
