QM BEARINGS (TIMKEN) QVPA22V315SM
OUTRAS MARCAS
QM BEARINGS (TIMKEN)
QM BEARINGS (TIMKEN) QVPA22V315SM
QVPA22V315SM PART NUMBER
Pillow Block Roller Bearing Unit - 3.9375 in Bore Dia., Two-Bolt Base, Solid Pillow Block, Cast Steel Material, Non-Expansion Bearing (Fixed)
QTY QUOTEQM BEARINGS (TIMKEN) - QM BEARINGS (TIMKEN) QVPA22V315SM
Patented V-Lock® mechanism evenly distributes force on the shaft, helping eliminate fretting corrosion
Maximum holding power and prevention of overtightening
Reliable mechanical withdraw
Preset spherical inner ring radial internal clearances (feeler gauges not required)
Quick installation (typically 10 minutes or less)
Works well with high-speed applications where shaft centering is an issue
Triple-lip contacting, self-purging nitrile rubber seal is excellent in moist and dirty applications and chemical and corrosion-resistant
SPECIFICATIONS
| Bore Diameter | 3.9375 in |
|---|---|
| Finish/Coating | Powder Coat |
| Overall Length | 16 in |
| Overall Width | 4.54 in |
| Overall Height | 9.47 in |
| Seal Type | Triple-lip contacting, self-purging nitrile rubber seal |
| Mounting | Two-Bolt Base |
| Radial Dynamic Load Capacity | 125000 lbs |
| Bearing Type | Spherical Roller |
| Radial Static Load Capacity | 147000 lbs |
| Bore Type | Round |
| Base Height | 2 in |
| Housing Construction | Solid Pillow Block |
| Lubrication Type | Lubrication Fitting |
| Base To Bore Centerline | 4.94 in |
| End Type | Open |
| Duty Type | Heavy Duty |
| Bolt Size | 0.875 in |
| Housing Material | Cast Steel |
| Series | QVPA |
| Locking Device | Single V-Lock Collar |
| Weight | 84 lbs |
| Bearing Material | Bearing Steel |
| Manufacturer Product Page | https://cad.timken.com/item/-roller-bearing-solid-block-housed-units-2/single-v-lock-two-bolt-pillow-block-inch/qvpa22v315s-5 |
| Bolt Center-To-Center Length | 13.5 in |
| Manufacturer Catalog | http://cad.timken.com/category/-roller-bearing-solid-block-housed-units-2 |
| Base Width | 3.96 in |
| Manufacturer Upc Number | 883450048828 |
| Expansion Type | Non-Expansion Bearing (Fixed) |
