SKF P4BE 308-SRB-SRH
SKF
SKF P4BE 308-SRB-SRH
P4BE 308-SRB-SRH PART NUMBER
Pillow Block Roller Bearing Unit - 3.5000 in Bore Dia., Four-Bolt Base, Solid Pillow Block, Cast Iron Material, Non-Expansion Bearing (Fixed)
QTY QUOTESKF - SKF P4BE 308-SRB-SRH
SKF roller bearing units are assembled, greased and ready-to-mount, saving time and reducing the risk of contaminating or damaging the bearing during installation
The bearing units can be used with commercial grade shafts and are located easily on the shaft by tightening the set (grub) screws in the mounting collar or locking collar
The housing base is reinforced with ribs and the area around the attachment bolt holes is strengthened to minimize the risk of cracking caused by over-tightening the attachment bolts
With SKF inch roller bearing units, logistics costs are reduced as there is only one part to order, store and mount
SPECIFICATIONS
| Bore Diameter | 3.5 in |
|---|---|
| Finish/Coating | Blue Alkyd/Acryl Paint (RAL 5007) |
| Overall Length | 14 in |
| Overall Width | 4.875 in |
| Overall Height | 7.5 in |
| Seal Type | TriGard Seal |
| Mounting | Four-Bolt Base |
| Radial Dynamic Load Capacity | 56900 lbf |
| Bearing Type | Spherical Roller |
| Base Height | 2.25 in |
| Bore Type | Round |
| Maximum Operating Temperature | Max 210 °F |
| Housing Construction | Solid Pillow Block |
| Maximum Rpm | 2300 rpm |
| Base To Bore Centerline | 3.75 in |
| Lubrication Type | Lubrication Fitting |
| Housing Material | Cast Iron |
| Bolt Size | 0.75 in |
| Locking Device | Concentric Collar |
| Series | FSYE |
| Bearing Material | Cast Iron |
| Weight | 36.6 lbs |
| Bolt Center-To-Center Length | 10.5000 to 11.7500 in |
| Manufacturer Product Page | http://www.skf.com/group/products/bearings-units-housings/bearing-units/roller-bearing-units/inch/pillow-block/index.html?designation=FSYE-3.1%2F2&unit=imperialUnit |
| Base Width | 4.5 in |
| Manufacturer Upc Number | 7316576663857 |
| Expansion Type | Non-Expansion Bearing (Fixed) |
