US MOTORS (NIDEC) D1P2D
US MOTORS (NIDEC)
US MOTORS (NIDEC) D1P2D
D1P2D PART NUMBER
General Purpose Motor - 3 ph, 1 hp, 1800 rpm, 208-230/460 V, 143T Frame, ODP (Open Drip-Proof) Enclosure, 50/60 Hz, Footed / Horizontal Mount
QTY QUOTEUS MOTORS (NIDEC) - US MOTORS (NIDEC) D1P2D
World Motor features except where noted
Class F insulation, Class B rise at service factor
Rolled steel frame 56–320, cast iron frame 360–440
Aluminum end shields 56–250, cast iron end shields 280440
“CE†mark on nameplate (140 frame and larger)
40°C ambient, NEMA Design B Performance on 60 Hz sine wave power
1.15 service factor
Regreasable bearings 180 frame and up
Double shielded bearings 140–400, open on 440
Bearing caps on 400 and 440 frames
F1 assembly position except where noted
Lifting provisions 210 frame and up
Applications: For use in pumps, fans, compressors, material handling and other general-purpose applications where contaminants are minimal
SPECIFICATIONS
| Motor Phase | 3 ph |
|---|---|
| Bearing Type | 6205-2Z-J/C3 |
| Motor Horsepower | 1.00 , 1 hp |
| Nema Design Class | B |
| Synchronous Rpm | 1800 rpm |
| Service Factor | 1.15 |
| Motor Supply Voltage | 208-230/460 V |
| Frame Material | Steel |
| Frame Size | 143T |
| Insulation Class | F |
| Enclosure Type | ODP (Open Drip-Proof) |
| Standards Met | CE, NEMA |
| Frequency Rating | 50/60 Hz |
| Weight | 30 lbs |
| Mounting Type | Footed / Horizontal |
| Applications | Pumps, Compressors, Fans, Material Handling |
| Duty / Condition Type | Continuous Duty |
| Harmonization Code | 8501.51.6040 |
| Full Load Current | 3.20?3.10 / 1.60 A |
| Full Load Efficiency | 0.855 |
| Motor Poles | 4-pole |
| Shaft Diameter | 0.88 in |
