US MOTORS (NIDEC) 8P10P2CCR
US MOTORS (NIDEC)
US MOTORS (NIDEC) 8P10P2CCR
8P10P2CCR PART NUMBER
Severe Duty - IEEE 841 Motor - 3 ph, 10 hp, 1800 rpm, 460 V, 215TC Frame, TEFC (Totally Enclosed Fan Cooled) Enclosure, 60 Hz
QTY QUOTEUS MOTORS (NIDEC) - US MOTORS (NIDEC) 8P10P2CCR
Inverter Grade® insulation system (meets NEMA® MG-1 part 31)
Class F insulation, Class B rise at full load (sine wave power)
All cast iron construction
Corrosion-resistant mill and chem-duty paint (250 hour salt spray test)
Stainless steel name plate (with CE mark) and zinc plated hardware
40°C ambient, NEMA® Design B performance (sine wave power)
VBXX® bearing isolators for IP55 protection
Same size regreasable open bearings and internal bearing caps (180 frame and up)
External grounding provision, epoxy coated rotor
10:1 variable torque; 5:1 constant torque on inverter power
Precision balance (< 0.05 IN/sec vibration)
Three phase 460V
1.15 SF on sine wave/1.0 SF on inverter power
SPECIFICATIONS
| Motor Category | IEEE 841 Motor |
|---|---|
| Shaft Diameter | 1.38 in |
| Motor Phase | 3 ph |
| Nema Design Class | B |
| Motor Horsepower | 10.0 , 10 hp |
| Frame Material | Cast Iron |
| Synchronous Rpm | 1800 rpm |
| Insulation Class | F |
| Motor Supply Voltage | 460 V |
| Ip Rating | 55 |
| Frame Size | 215TC |
| Standards Met | CE, NEMA |
| Enclosure Type | TEFC (Totally Enclosed Fan Cooled) |
| Harmonization Code | 8501.52.4000 |
| Frequency Rating | 60 Hz |
| Weight | 200 lbs |
| Duty / Condition Type | Inverter Duty |
| Applications | Constant Speed and Inverter Duty Applications |
| Mounting Type | Footless/C-Face Flange |
| Full Load Current | 12 A |
| Full Load Efficiency | 0.91 |
| Motor Poles | 4-pole |
