US MOTORS (NIDEC) DJ1E2DM
US MOTORS (NIDEC)
US MOTORS (NIDEC) DJ1E2DM
DJ1E2DM PART NUMBER
Close Coupled Pump Motor - 3 ph, 1 hp, 1800 rpm, 190/380//208-230/460 V, 143JM Frame, ODP (Open Drip-Proof) Enclosure, 50/60 Hz
QTY QUOTEUS MOTORS (NIDEC) - US MOTORS (NIDEC) DJ1E2DM
Class F insulation, Class B rise at service factor
Rolled steel frame
Aluminum end shields (140–250), cast iron end shields (280–320)
Oversized ball bearings w/ locked shaft end construction
Premasked Mylar™ nameplate (with CE mark)
F1 assembly position
Regreasable bearings (180 frame and up), lifting provisions (210 frame and up)
Double shielded bearings
40°C ambient, NEMA® Design B Performance on 60 hertz sine wave power
JM shaft for mechanical seal
Epact Efficiency
Full 50 and 60 Hz operating data on nameplate (03)
Applications: For the specific requirements of centrifugal pumps where the pump impeller is mounted directly on the motor shaft. Used where dirt and moisture are minimal
SPECIFICATIONS
| Motor Category | Close Coupled Pump Motor |
|---|---|
| Mounting Type | Footed/Horizontal |
| Motor Phase | 3 ph |
| Duty / Condition Type | Continuous Duty |
| Motor Horsepower | 1.00 , 1 hp |
| Motor Poles | 4-pole |
| Synchronous Rpm | 1800 rpm |
| Nema Design Class | B |
| Motor Supply Voltage | 190/380//208-230/460 V |
| Frame Material | Steel |
| Frame Size | 143JM |
| Harmonization Code | 8501.51.6040 |
| Enclosure Type | ODP (Open Drip-Proof) |
| Weight | 30 lbs |
| Frequency Rating | 50/60 Hz |
| Manufacturer Product Page | https://www.motorboss.com/webapp/wcs/stores/ctp/mtp/EcatLink.jsp?modelNumber=DJ1E2DM |
