SMC CP96SD100-160
SMC
SMC CP96SD100-160
CP96SD100-160 PART NUMBER
CP96SD100-160 CYLINDER, TIE ROD
MFR
CP96 Tie Rod Air Cylinder - 100 mm Bore, 160 mm Stroke, 25 mm Rod, M20x1.5 Male Thread, Single Rod, Clevis Rear (Detachable), MP2 Mount, Air Cushion Both Ends & Rubber Cushions Both End, 1/2 BSPP Ports
QTY QUOTESMC - SMC CP96SD100-160
The cushion stroke time can now be reduced with the double cushioning, which improves the cycle time
The bumper cushion reduces the metal noise that occurs when the piston stops at the end of the stroke
Switch can be slid in for mounting
Groove for M9, A9 switches and CNOMO groove are on all four sides
SPECIFICATIONS
| Cylinder Type | Metric |
|---|---|
| Proof Pressure | 218 psi |
| Rod Type | Single Rod |
| Operating Pressure Range | 7 to 145 psi |
| Bore Diameter | 100 mm |
| Push Force At 100 Psi | 5498 N |
| Stroke Length | 160 mm |
| Pull Force At 100 Psi | 5154 N |
| Mounting Type | Clevis Rear (Detachable), MP2 |
| Standards Met | ISO 15552 |
| Rod Gender | Male |
| Overall Width | 140 mm |
| Rod - Thread Size | M20x1.5 Male Thread |
| Lube Style | Non-Lube |
| Port Size | 1/2 BSPP |
| Seal Kit | CS95-100 |
| Cushion Type | Air Cushion Both Ends & Rubber Cushions Both End |
| Rod Clevis | GKM20-40 Steel |
| Series | CP96 |
| Angled Pivot Bracket - Plain | E5100 |
| Options Included | Magnetic Piston, Switch Ready |
| Angled Pivot Bracket - Ball Joint | ES5100 |
| Locking Position | Without Locks |
| Flange Mount - Mf1/Mf2 | F5100 |
| Operating Temperature Range | 14 to 140°F |
| Clevis Mount (Detachable) - Mp2 | D5100, DS5100 (For ES Accessory) |
| Port Gender | Female |
| Sperical Rod Eye | KJ20D Female Thread |
| Port Thread Standard | BSPP |
| Eye Mount - Mp4 (Plain) | C5100 |
| Piston Action | Double-Acting |
| Eye Mount - Mp6 (Ball Joint) | CS5100 |
| Rod Size | 25 mm |
| Foot Mounts - Ms1 | L5100 |
| Rod Thread Standard | ISO |
| Alignment Coupler / Floating Joint | JAH50-20-150 |
| Maximum Operating Pressure | 145 psi |
| Minimum Operating Pressure | 7 psi |
